Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13617572
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Do not burn multi-chip saw blade, multi-saw, Guangdong is Kai woodworking machinery |
Published: | 2014-12-29 |
Validity: | 0 |
Specifications: | Limited |
Quantity: | |
Price Description: | |
Detailed Product Description: | Kai cards are multi-saw equipment operating instructions: First, before starting the examination 1, first check the machine before starting the circuit is switched on correctly, the switch is normal. Supply voltage requirements 380V. 2. Check whether the cooling water pipe through the water multi-saw equipment preferred brand, pressure to reach normal water pressure. 3, check all the bolts are tightened spindle, spindle drive belt and feed chain is tensioned. No chipping blade is sharp teeth broken tooth situation. 4, front door a final check of the machine is closed, front door with a spring safety switch at the top right corner, if it is not no spring shutting top safety switch the machine will not start. Second, start the machine 1 on the machine by pressing the 1st button on the console to hear the motor starts, wait 5-8 seconds multi-saw, on the 1st indicator lights above the button. 2, then press the button on the 2nd, the same wait 5-8 seconds after the 2nd indicator lights above the button. 3, open pipes switch. Three, began producing one in the hand on the console machine / self-select button to switch the automatic position, and then press the button to automatically feed. The timber into the feed table began to feed processing. 2, according to the production needs of the feeding speed, you can adjust the inverter control knob on the console, the feed rate has been adjusted to the required position on the (adjusted between 30-35) can be. 3, in the production process, for safety reasons, the operator can not be facing the feed and discharge port position. And wear goggles. Foshan are Kai multi-chip sawing machine maintenance guide: a multi-saw equipment maintenance, inspection or replacement of any downtime blade, you must cut off the power switch and close the pipes can be carried out before the maintenance of the machine. 2, a day after work off automatic multi-chip saw logs, belts must be checked, the feeding chain is loosening. Add oil to the chain. Check the blade shaft and each spindle nut is loose big phenomenon, if there is loosening, make sure to tighten the nut. 3, the transmission oil level every two weeks to check the bottom of the back door of a cabin, there must be time to add oil when the oil level drops red zone. Every six months should be fully transmission oil change times. 4, saw blades, navigation chip, spacer, spacer, such as long-term use, should be removed and soaked with oil. Apply butter on the spindle. 5, the multi-chip sawing machine can rotate each site, including the main shaft, roller, new water-cooled cylinder pressure multi-saw, drive belt shaft, transmission shaft and other parts of the chain should be coated with butter to keep a good rust and lubricating effect . 6, after a day off from work, you want the machine to clean up the debris and sawdust, wood dust to the electrical box clean. Motor heat sink should also be cleaned to maintain good heat dissipation. Navigation clean sheet and put some lubricant after. At the same time the blade should be cleaned. Shut off the power and water pipes. Do not burn multi-chip saw blade, multi-saw, woodworking machinery Kai Guangdong is provided by Nanhai District of Foshan City is Kai Machinery Factory. Nanhai District of Foshan City is Kai Machinery Factory (www.gzzhengqi.com) strong, credible, in Foshan, Guangdong woodworking machine tool industry has accumulated a large number of loyal customers. The company better work attitude and continuous improvement are Kai innovative ideas will lead you hand into the brilliant machinery and a better future! |
Admin>>>
You are the 28648 visitor
Copyright © GuangDong ICP No. 10089450, Nanhai District of Foshan City is Kai Machinery Factory All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 28648 visitor
Copyright © GuangDong ICP No. 10089450, Nanhai District of Foshan City is Kai Machinery Factory All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility